What you need from a new driveway
Planned around real parking
We work around bay sizes, turning room and access, not just the shape of the empty space.
Built from the ground up
Excavation, sub-base, edging and drainage are treated as the job, not skipped to rush ahead.
Helpful material comparison
We explain where resin, Tarmac®, gravel and blocks each make sense for your property.
Choosing the right driveway surface for your lifestyle
A new drive has to cope with more than the first nice photo. It needs room for the cars you actually own, enough space to get in and out without a three-point shuffle, and a finish that suits how much upkeep you want to do later. With J Lowther & Sons Driveways & Building Services, you can compare block paving, resin, Tarmac® and gravel in plain terms. We talk through appearance, day-to-day use, drainage and how each surface sits with the front of your property, so you are not left guessing which one sounds best on paper but proves awkward in real life.
Strong groundwork before the surface goes down
A driveway lasts because of what is beneath it. We assess the site, set the levels, excavate to the right depth and build a load-bearing sub-base before the finished surface is laid. Edge restraint, falls and drainage all matter, especially where water already sits or vehicles turn in the same spot every day. If the existing drive is only tired on top, we can discuss repair. If the base is failing, a full replacement is usually the smarter spend.
Frequently asked questions
How do we choose the best surface for our driveway?
We start with how you use the space, how many vehicles it needs to hold, what upkeep you want later and how the front of the property is laid out. Then we compare block paving, resin, Tarmac® and gravel in practical terms, so the choice suits the site instead of just the brochure.
Can an old driveway be repaired instead of replaced?
Sometimes, yes. If the trouble is localised and the base is still sound, repair can be worth doing. If the drive is sinking in several places, holding water or breaking up because the structure below has failed, replacement usually gives a better long-term result and a more even finish.
What happens before the new surface is laid?
Before any finished material goes down, we check levels, drainage, thresholds, access and the condition of the existing ground. The area is then excavated as needed and built back with a proper sub-base and edge support, because that stage does the heavy lifting for the years ahead.